«AUEZOV UNIVERSITY» ҒЫЛЫМИ ЖУРНАЛЫ - НАУЧНЫЙ ЖУРНАЛ «AUEZOV UNIVERSITY» - SCIENTIFIC JOURNAL «AUEZOV UNIVERSITY»

The journal purpose: to inform a wide range of experts about new ideas, scientific and technical problems, new scientific developments and research results.

The journal covers results of scientific researches of scientists, teaching staff, master and PhD degree students, industrial workers, which have a high-priority nature or theoretical and practical value. Analytical, survey and problem scientific articles, debatable materials connected with actual questions in the field of fundamental and applied investigations of following directions are published in it:

• technical sciences;
• computer science, information technologies;
• pedagogical sciences and humanities;
• natural sciences, life sciences;
• sciences about the Earth, agriculture;
• economic sciences;
• juridical sciences.

The present publication rules are based on Interstate standards: IS 7.1-2003 Bibliographing. Bibliographic description, IS 7.79-2000 Transliteration rules of Cyrillic script by Latin alphabet and IS 7.32-2001 Research report. Structure and drawing up rules.

A resolution about the possibility of publication of an article in the journal is adopted on the basis of the decision of the committee, which composition is confirmed by M. Auezov SKU Academic Council.

• Languages - Kazakh, Russian, English.
• Periodicity - 4 numbers per a year.

Editor-in-Chief – KOZHAMZHAROVA DARIYA PERNESHOVNA, Rector of M. Auezov South Kazakhstan University, Academician of the National Academy of Sciences of the Republic of Kazakhstan, Doctor of Historical Sciences, Professor
Редактор – Nazarbek Ulzhalgas Bakytovna, Director of the Department of Academic Science
Technical editors – Aleksandridi E.Yu. - Main Specialist of the Center for Scientific and Analytical Information
Kadyrova D.S. - Main Specialist of the Center for Scientific and Analytical Information

Suleimenov U.S. – Vice-Rector for HP and I, Doctor of Technical Sciences, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Isabella Nowak – Doctor of Chemistry, Professor, Adam Mickiewicz University in Poznań, Poland; Avramov K.V. – Doctor of Technical Sciences, Professor, National Technical University “Kharkiv Polytechnic Institute”, Ukraine; Soloviev A.A. – Doctor of Physical and Mathematical Sciences, Professor, Moscow State University named after M.V. Lomonosov, Russia; Emelin A.V. – Doctor of Physical and Mathematical Sciences, Professor, St. Petersburg State University, Russia; Bohuslava Leska – Doctor of Chemistry, Professor, Adam Mickiewicz University in Poznań, Poland; Polina Prokopovich – PhD, Cardiff University, UK; Meor Mohammed Fared – Associate Professor, Putra University Malaysia, Malaysia; Alden A. - Academician, School of Computing and Technology, West London University, UK; Ivakhnenko A.P. – PhD, Director, Center for Petroleum Research, Heriot-Watt University, UK; Elizaveta Fasler-Kahn – PhD, Professor, University of Basel, Austria; Radyuk S.N. – PhD, Associate Professor, Southern Methodist University, USA; Jongo Ok – PhD, Professor, Seoul National Technical University, Korea; Marfenin N.N. – Doctor of Biological Sciences, Professor, Moscow State University named after M.V. Lomonosov, Russia; Zhurynov M.Zh - Doctor of Chemical Sciences, Professor, Academician of the National Academy of Sciences of the Republic of Kazakhstan, Kazakhstan; Aimenov Zh.T. – Doctor of Technical Sciences, Professor; Academician of the National Academy of Sciences of the Republic of Kazakhstan, M. Auezov South Kazakhstan University, Kazakhstan; Baytanaev B.A - Doctor of Technical Sciences, Professor, Corresponding Member of the National Academy of Sciences of the Republic of Kazakhstan, M. Auezov South Kazakhstan University, Kazakhstan; Zhantasov K.T. - Doctor of Technical Sciences, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Anarbaev A.A. – Doctor of Technical Sciences, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Ismailov B.R. - Doctor of Technical Sciences, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Nadirov K.S. – Doctor of Chemistry, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Dzhakipbekova N.O. - Doctor of Technical Sciences, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Kulymbetova A.E. – Ph.D., Professor, M. Auezov South Kazakhstan University, Kazakhstan; Kalybekova A.A. - p.g.d., professor, M. Auezov South Kazakhstan University, Kazakhstan; Myrzakhmetov M. - PhD, Professor, M. Auezov SKU, Kazakhstan; Nazarbekova S.P. – Ph.D., professor, M. Auezov South Kazakhstan University, Kazakhstan; Esimov B.O. – Doctor of Geology and Mathematics, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Niyazbekova R.K. – Doctor of Economics, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Volnenko A.A. - Doctor of Technical Sciences, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Tulekbaeva A.K. – Candidate of Technical Sciences, Associate Professor, M. Auezov South Kazakhstan University, Kazakhstan; Sarsenbi A.M. – Doctor of Physical and Mathematical Sciences, Professor, M. Auezov South Kazakhstan University, Kazakhstan; Tleuov A.S. – Prof., Professor, M. Auezov South Kazakhstan University, Kazakhstan; Zholdasbekova S.A. – Ph.D., Professor, M. Auezov South Kazakhstan University, Kazakhstan; Ilyasov R.M. – Candidate of Technical Sciences, Associate Professor, M. Auezov South Kazakhstan University, Kazakhstan; Karbozova G.K. – Candidate of Philological Sciences, Associate Professor, M. Auezov South Kazakhstan University, Kazakhstan; Oryntaev Zh.K. – PhD in Law, Associate Professor, M. Auezov South Kazakhstan University, Kazakhstan; Beisenbaev O.K. – Doctor of Chemistry, Professor, M. Auezov South Kazakhstan University, Kazakhstan.

 

Requirements to drawing up of an article

1. An article is submitted in paper and electronic forms. The article text should be typed in a text editor Microsoft Word, a font Times New Roman, a font size of a basic text - 12 p.t., figures, diagrammes - 11 p.t., a line spacing - single, an indented paragraph - 1,0, width alignment.
2. Page Setup: format А4, page margins: left - 2 cm, right - 2 cm, top - 2 cm, bottom - 2 cm.
3. An article total amount including tables, figures and references - from 3 to 10 pages.
4. An article name should be short and mirror its contents.
5. An article in Kazakh should include аннотация and abstract, an article in Russian - түйін and abstract, an article in English - түйін and аннотация. Contents of аннотация, түйін and abstract should be identical. Quantity of words - 100-150.
6. Information about an author (authors) should include: a last name, a first name, an academic degree, an academic rank, a place of employment, a city, a country.

 

An article structure

1. UDC (a universal decimal classification index) - in the left top corner (11 p.t.).
2. A name of an author (authors) (12 p.t.).
3. A position, an academic degree and rank, a place of employment, a city, a country (11 p.t.).
4. An article name - in the article language, Caps Lock 12 p.t.
5. Abstract - in the article language, 11 p.t.

An abstract represents a brief summary of a scientific investigation. An abstract should explain the investigation heart to readers. Research results are described extremely precisely and informatively. An article text should not contain minor information, unnecessary words, general and non-significant wordings, abbreviations, references. An abstract should be written as one paragraph. A qualitatively made up and translated abstract raises interest to the article, and also the probability of citing of the article by foreign colleagues.

6. Keywords - up to 10 words, 11 p.t.
7. A text part of an article (12 p.t.) should be structured using headings, for example: Introduction (necessarily), Theoretical analysis, Experimental part, Results and their discussion, Conclusion (necessarily), Designations, References (necessarily). The headings are not numbered.

Formulas must be typed in one of the formula editors (Microsoft Equation or MathType). Tables and figures should be arranged after their mention. Each a table should have a name. Figures should be clear and not scanned. An underline example: Fig. 1. Dependence ....: a - • •4 ^{b -} •••

All abbreviations, except for wittingly known ones, should be deciphered at the first their appearance in the text.

8. A reference list should include only those works, which are quoted in the text and have been published or accepted to publication. References should be numbered according to their mention in the text. Self-citing should not exceed 20-30% from the general reference list. Literary sources published no more than 10-15 years ago should make not less than 70% of the list.
9. An abstract (in Russian and English for an article written in Kazakh; in Kazakh and English for an article written in Russian; in Kazakh and Russian for an article written in English).
10. Information about the author responsible for correspondence: a first name, a last name, a phone number, e-mail.

The editor-in-chief of the journal «Auezov University» ғылыми журналы – Научный журнал «Auezov University» – Scientific Journal «Auezov University» - Nazarbek U.B., the director of department of academic science of M. Auezov SKU; the responsible editor - Ainabekov N.B., the chief of Center for Scientific and Analytical Information; the technical editor – Aleksandridi Ye.Yu., the main specialist of Center for Scientific and Analytical Information.

The journal editorial board verifies on plagiarism all the articles given to publication. If individuality of an article makes less than 60%, the paper is not accepted to the publication. There must be at least 7 sources of literature.

The journal office: Shymkent, Tauke-khan Avenue, 5, M. Auezov SKU, building № 16, office 107, 1 floor, phone: +7(7252) 21-19-82, 30-05-71, fax: +7(7252) 211989, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Publication cost - 4000 tenge. The payment is accepted both by cash and by bank transfer.

 

Bank details:

“Eurasian-bank” JSC

Registration number of a tax payer: 582100003432

Individual identification code:

KZ 9894815KZT22032170 (KZT)

KZ0294815EUR22030240 (EUR)

KZ8494815RUB22030380 (RUB)

KZ3294815USD22030617 (USD)

Bank identification code: EURIKZKA

Code 16

Business identification number: 990240005557

All State Classifier of enterprises and organizations 39140473

Code of All State Classifier of economic activity 85420

Code of administrative territorial objects 511013100

 

Attachment 1

 

Variant 1

 

UDC 541.18 (font size – 11 p.t.)   G.A. Askarova (12 p.t.) Cand.Chem.Sci., associate professor, M. Auezov South Kazakhstan University, Shymkent, Kazakhstan (11 p.t.) *Corresponding author’s email: This email address is being protected from spambots. You need JavaScript enabled to view it. (11 p.t.)   AL-PHARABI PHILOSOPHIC VIEWS (12 p.t.) Abstract (11 p.t.) Keywords (11 p.t.) A main part (12 p.t.) References (12 p.t.) 1. 2. Түйін (11 p.t.) Аннотация (11 p.t.) Information about the author responsible for correspondence

 

Variant 2

UDC 541.18 (font size – 11 p.t.)   D.K. Tokhtarov, Е.М. Zhumagulov*, D.B. Aidarbekova, S.N. Daribekov (12 p.t.) Doctor of Technical Sciences, Professor, M. Auezov SKU, Shymkent, Kazakhstan (11 p.t.) Candidate of Technical Sciences, Associate Professor, M. Auezov SKU, Shymkent, Kazakhstan (11 p.t.) Art. lecturer, SKU im. M. Auezov, Shymkent, Kazakhstan (11 p.t.) Candidate of Technical Sciences, Associate Professor, M. Auezov SKU, Shymkent, Kazakhstan (11 p.t.) *Corresponding author’s email: This email address is being protected from spambots. You need JavaScript enabled to view it. (11 p.t.)   AL-PHARABI PHILOSOPHIC VIEWS (12 p.t.) Abstract (11 p.t.) Keywords (11 p.t.) A main part (12 p.t.) References (12 p.t.) 1. 2. Түйін (11 p.t.) Аннотация (11 p.t.) Information about the author responsible for correspondence

 

Variant 3

UDC 541.18 (font size – 11 p.t.)

 

D.K. Tokhtarov¹, Е.М. Zhumagulov^1*, D.B. Aidarbekova², S.N. Daribekov³ (12 p.t.)

¹Dr.Sci.Tech., professor, Е.А. Buketov Karaganda State University, Karaganda, Kazakhstan (11 p.t.)

¹Cand.Chem.Sci., associate professor, Е.А. Buketov Karaganda State University, Karaganda,
Kazakhstan (11 p.t.)

²Senior lecturer, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan (11 p.t.)

³Cand.Chem.Sci., associate professor, Nazarbayev University, Astana, Kazakhstan (11 p.t.)

^*Corresponding author’s email: This email address is being protected from spambots. You need JavaScript enabled to view it. (11 p.t.)

 

AL-PHARABI PHILOSOPHIC VIEWS (12 p.t.)

Abstract (11 p.t.)

Keywords (11 p.t.)

A main part (12 p.t.)

References (12 p.t.)

1.

2.

Түйін (11 p.t.)

Аннотация (11 p.t.)

Information about the author responsible for correspondence

 

 

Attachment 2

 

Drawing up of references

Description of translated books:

3. Timoshenko S.P., Young D.H., Weaver W. Vibration problems in engineering. 4^th New York, Wiley, 1974. 521p. (Russ. ed.: Timoshenko S.P., Iang D.H., Uiver W. Kolebaniia v inzhenernom dele. Moscow, Machinostroenie Publ., 1985. 472p.).
4. Brooking A., Jones P., Cox F. Expert systems. Principles and case studies. Chapman and Hall, 1984. 231p. (Russ. ed.: Bruking A., Dzhons P., Koks F. Ekspertnye sistemy. Printsipy raboty iprimery. Moscow, Radio i sviaz’ Publ., 1987. 224p.).

Description of unpublished documents:

1. Latypov A.R., Khasanv M.M., Baikov V.A. Geology and Producrion (NGT GiD). Certificate on officiall registration of the computer program. No. 2004611198, 2004. (In Russian unpublished).
2. Generator davleniia GD-2M. Technicheskoe opisanie I instruktsiia po ekspluatation [Pressure generator GD-2M. Technical description and user manual]. Zagorsk, Res. Inst. Appl. Chem. Publ., 1975. 15p. (In Russian unpublished).

Description of Internet resource:

1. APA Style (2011). Available at: http://www.apastyle.org/apa-style-help.aspx (accessed February 2011).
2. Pravila Tsitirovaniya Istochnikov (Rules for Citing of Sources) Available at: http://www.scribd.com/doc/1034528/ (accessed 7 February 2011).

Description of a thesis or a thesis abstract:

1. Semenov V.I. Matematicheskoe modelirovanie plazmy v sisteme kompaktnyi tor.fiz.- mat. nauk [Matematical modeling of the plasma in the compact torus. Dr. phys. and mat. sci. diss.]. Moscow, 2003. 272p.

or

Semenov V.I. Matematicheskoe modelirovanie plazmy v sisteme kompaktnyi tor. Dok. Diss. [Matematical modeling of plasma in a compact torus system. Doct. Diss.]. Moscow, 2003. 272p.

2. Grigor’ev Iu.A. Razrabotka nauchnykh osnov proektirovaniia arhitektur raspredelennkh sistem obrabotki dannykh. Diss. dokt. tekhn. nauk [Development of scientific bases of architectural design of distributed data processing systems. Dr. the. sci. diss.]. Moscow, Bauman MSTU Publ., 1996. 243 p.

Standards

1. GOST 8.586.5-2005. Metodika vypolneniia izmerenii. Izmerenie raskhoda ikolichestva zhidkostei i gazov s pomoshch’iu standartnykh suzhaiushchikh ustroistv [State Standard 8.586.5- 2005. Method of measurement. Measurement of flow rate and volume of liquids and gases by means of orifice devices]. Moscow, Standartinform Publ., 2007. 10p.

or

State Standard 8.586.5- 2005. Method of measurement. Measurement of flow rate and volume of liquids and gases by means of orifice devices. Moscow, Standartinform Publ.,

2007. (In Russian).

Description of a patent:

1. Palkin M.V., e.a. Sposob orientirovaniia po krenu letatel’nogo apparata s opticheskoi golovkoi samonavedeniia [The way to orient on the roll of aircraft with optical homing head]. Patent RF, no. 2280590, 2006.

Description of journal articles:

1. Zagurenko A.G., Korotovskikh V.A., Kolesnikov A.A., Timonov A.V. Kardymon D.V. Tekhniko-ekonomicheskaya optimizatsiya dizaina gidrorazryva plasta [Techno-economic optimization of the design of hydraulic fracturing]. Neftyanoe khozyaistvo - Oil Industry,

• 11, pp.54-57.

or

Zagurenko A.G., Korotovskikh V.A., Kolesnikov A.A., Timonov A.V. Kardymon D.V. Technical and economic optimization of hydrofracuring desing. Neftyanoe khozyaistvo - Oil Industry, 2008, no.11, pp.54-57. (In Russian).

Description of electronic journal articles:

1. Swaminathan V., Lepkoswka-White E., Rao B.P. Browsers or buyers in cyberspace? An investigation of electronic factors influencing electronic exchange. Journal of Computer- Mediated Communication, 1999, vol.5, no.2, Available at:                           http://www.

ascusc.org/jcmc/vol5/issue2/ (Accessed 28 April 2011).

Description of an article from DOI:

1. Zhang Z., Zhu D. Experimental research on the localized electrochemical micromaching. Russian journal of Electrochemistry, 2008, vol. 44, no. 8, pp. 926-930. doi:

10.1134/S1023193508080077

Description of periodic journal articles (Proceedings)

1. Astakhov M.V., Tagantsev T.V. Eksperimental’noe issledovanie prochnosti soedinenii “stal’-kompozit” [Experimental study of the strength of joints “steel-composite”]. Trudy MGTU “Matematichechskoe modelirovanie slozhnykh teknicheskikh sistem” [Proc. Of the Bauman MSTU “Matematical Modeling of Complex Technical Systems”], 2006, no. 593, pp. 125-130.

Description of conference materials:

1. Usmanov T.S., Gusmanov A.A., Mullagalin I.Z., Muhametshina R.Ju., Chervyakova A.N., Sveshnikov A.V. Features of the design of field development with the use of hydraulic fracturing. Trudy 6 Mezhdunarodnogo Simpoziuma “Novye resursosberegayushchie tekhnologii nedropol’zovaniyai povysheniya neftegazootdachi” [Proc. 6^th Int. Symp. “New energy saving subsoil technologies and the increasing of the oil and gas impact”]. Moscow, 2007, pp. 267-272. (In Russian)

Description of a book (monographs, collections):

1. Nenashev M.F. Poslednee pravitel’stvo SSSR [Last government of the USSR]. Moscow, Krom Publ., 1993. 221p.

Latyshev V.N., Tribologiya rezaniya. Kn.1: Friktsionnye protsessy pri resanie metallov (Tribology of Cutting, Vol.1: Frictional Processes in Metal Cutting), Ivanovo: Ivanovskii Gos. Univ., 2009.

2022
№1 (1) 2022